|
Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!
|
| T O P I C R E V I E W |
| Roland |
Posted - March 13 2007 : 08:31:02 AM
hey Jeff;
Trying to help Joe out here with his new motor. He is going to do new motor break in on stock injectors, then wants to go to 50#. Do you have 50# chip info in you "puter" somewhere, that you could download to my memcal? (has lift off board inside)
His custom grind cam is slightly larger than the Comp. 422...... and ported stockers. I assume that when going to 50's, he will use 3 bar.
He (I) am looking for something off the shelf that will work reasonably well from the get-go, with fine tuning done in the future (you or Pablo)
Can this be easily accomplished, or is it gonna be time consuming? Your thoughts on the matter please, kind sir. I don't want him to have to go thru the BS that Randy went thru. Thanks and look forward to seeing you soon. |
| 5 L A T E S T R E P L I E S (Newest First) |
| Paul |
Posted - March 21 2007 : 10:07:07 PM
As soon as I get my Ty running again in 2 weeks I should be free to help get Joes and yours tuned.
Joe, we are opening up Code59, if you want you can barrow my spare ECM with the Wideband wired into it and the 50 Bin cal we have. We can tune it and once it is where you like, burn the bin. 59 doesn't require a Wideband to run. 59 mainly is stock code with a big ass fuel table. You can turn off all the wideband stuff and get the benefits of the bigger table. The wideband is just icing on the cake.
Call me and we will figure it out. |
| maitai1993 |
Posted - March 21 2007 : 09:47:00 AM
Jeff can you use my bin it will prob work for joe
Speaking of a tune paul when we going to finish mine... |
| Roland |
Posted - March 14 2007 : 09:37:42 AM
Thanks Jeff..... that would be great.
Pablo:
I'll wait to hear from you as to when you wanna visit me, or allow me to come visit you.
Joe: get some miles on that baby!
Thanks all..... |
| js design |
Posted - March 14 2007 : 09:28:07 AM
I have a Jeff special 50# base, of course we have a base for code59 also.
I am sure Pablo can help, I can email him my 58 base. |
| Roland |
Posted - March 14 2007 : 07:46:59 AM
Pablo;
Do you by chance have a 50# chip stored away in your pc that I could stop by and visit and have it downloaded to my memcal?
I'm trying to get Joe underway on his stock chip/injectors for breakin, then possibly switch over to the 50# injectors/chip April 7th at Ken's showroom. Perhaps you or Jeff would have some time then to fine tune for him, "IF" needed.
Joe: you need to start putting some miles on the Ty in case something comes together here.
Thanks guys, |
|
|
|
|
| NWSTP Forum |
© 1998-2011 NWSTP |
 |
|
|
Home
Forums
Events Calendar
NWSTP Admins
Guestbook
FAQ
RSS
Register
