| T O P I C R E V I E W |
| maitai1993 |
Posted - July 29 2006 : 09:30:07 AM
i drove it to work to day and it is making a sound when it shifts int 2nd gear its still shifting hard as hell how do i tame that down tv cable less or tighter |
| 5 L A T E S T R E P L I E S (Newest First) |
| maitai1993 |
Posted - August 02 2006 : 09:24:59 AM
I tried to call you the other day and I had 9279
it was a guy named bill who proceded to Question me about how i got his # funny ass stuff I flipped him so much s_it... |
| Paul |
Posted - August 01 2006 : 6:15:10 PM
Randy we got to get that thing figured out. Follow Rolands tip. That should make it better. Call me 206-972-9379 so we can figure out a time to hook up and get your truck tuned. Still waiting on the other Wb02 to show up along with the Spare ECM. |
| maitai1993 |
Posted - August 01 2006 : 08:54:38 AM
sound in not trans my prop shaft safty loop took a hit and it sometimes hits the propshaft so tranny is ok I think I will check a few things out and try what Roland said and let you guys know...thanks |
| Roland |
Posted - July 30 2006 : 06:24:23 AM
hey Randy;
Loosen the cable to ease the shift and lower shift points. Push in on the metal button with your left hand, and push the cable cover towards the passenger side with your right hand. Do so in small increments. Afterwards, to check .... open throttle with left hand and check tension on the actual cable (not the outer cover) with your right hand. Test drive and repeat the process if necessary. Hope this helps, |
| Ty0279 |
Posted - July 29 2006 : 10:41:47 PM
What kind of sound?
How's the fluid? When's the last time you changed it? Did you use an additive like Lubeguard? |
Home
Forums
Events Calendar
NWSTP Admins
Guestbook
FAQ
RSS
Register
